Essex Designed AP Racing Radi-CAL Competition Brake Kit (Front CP9660/355mm) - C6 Corvette (all trims)

• Features AP Racing CP9660 Radi-CAL six piston calipers - Learn More Here
• 355x32mm, 72 vane AP Racing disc - Learn More Here
• Saves 16 unsprung lbs. from nose of C6 vs. base OEM brakes, and 19 lbs. from C6 Z06
• Every component designed to resist the heat of extended track sessions
• Pistons sized properly to allow for seamless integration with OEM master cylinder and ABS system
• Designed to work with OEM rear brakes or our Essex/AP Racing rear BBK

Whats in the box?

• One pair AP Racing CP9660 Radi-CAL Pro5000R racing calipers
• One pair 355x32mm AP Racing CP5773, 72 vane, J Hook racing discs, with fully floating 6061 hard anodized aluminum hats, and attachment hardware
• One pair caliper mounting brackets and hardware
• One pair Spiegler Stainless Steel Brake Lines with abrasion resistant coating
• Detailed installation instructions
• Brake pads are NOT included with our system. Racing brake pads are a highly personal choice. Many manufacturers include a set of inexpensive, low quality pads with their brake kits.

Advantages Over OEM C6 Brake System

• Approximately 8 lbs. of unsprung weight reduction from EACH front corner vs. base C6, or 16 lbs. of unsprung weight reduction from the car. Offers 19 lbs. unsprung weight reduction from front of C6 Z06.
• AP Racing Radi-CAL calipers are the stiffest, lightest, and most technologically advanced calipers available at any price
• CP9660 calipers use a 18mm thick, commonly available brake pad shape
• Ventilated, domed back, stainless steel pistons keep heat out of the brake fluid and provide an ultra-firm pedal
• Mitigation of pad knockback via anti-knockback springs behind the caliper pistons
• Anodized caliper finish that is resistant to wear and deterioration at elevated temperatures
• Stainless steel caliper hardware for a long caliper service life under frequent pad change conditions
• High temperature, low drag seals that will hold up to track temps= less rebuilding and longer service life
• No dust boots to burn up
• Simple pad change with two bolts or quick-change spring clip, no caliper removal required
• Lifetime professional caliper rebuilding support by Essex (at a fee)- pull off your calipers, send them to us, we clean, inspect, and rebuild them
• Available disc burnishing service ensures that your kit arrives ready to be installed and driven hard immediately
• Championship winning, 72 vane, fully floating, AP Racing J Hook racing discs with 12 attachment points to hat
• Anti-knockback/anti-rattle disc attachment hardware
• Replacement iron disc rings available at an extremely competitive replacement price
• Disc metallurgy specifically designed to handle the temps typically seen on track offer a long service life
• Highest quality, Spiegler stainless steel brake line with clear sheath that reduces compliance over OEM rubber design

Wheel Fitment & Installation

Complete Kit Installation Instructions
Caliper Installation Drawing
Disc Installation Drawing
Iron Ring Replacement Assembly Instructions
Wheel Fitment Template

Confirmed wheels that fit without a spacer:

• OEM C5 Z06 Rear 18x10.5" wheels when run on front of car
• OEM C6 Z06 Front wheels